BREVINI HYDROLIC KIT

0.00

Category:

Description

SPECIFICATIONS

  • Crosfield Agro offers a complete range of hydraulic valves for direction, flow, and pressure control. CETOP2 through CETOP10 size manifold mount solenoid valves as well as mating sandwich mount modular flow control, pressure control, and check valve functions.
  • 12vdc Double Solenoid Valve – Spool Type 01 – AD3E01CM
  • Cetop 3 / NG06 – Directional Control Valve, Double Solenoid Valve – Spool Type 01, Part: AD3E01CM
  • The BREVINI directional control valves NG6 are designed for sub plate mounting with an interface in accordance with UNI ISO 4401 – 03 – 02 – 0 – 94 standard (ex CETOP R 35 H 4.2-4-03), and can be used in all fields on account of their high flow rate and pressure capacities combined with compact overall dimensions.
  • The use of solenoids with wet armatures allows a very practical, safe construction completely dispensing with dynamic seals; the solenoid tube is screwed directly onto the valve chest whilst the coil is kept in position by means of a lock nut.
  • The special, precise construction of the ports and the improvement of the spools enables relatively high flow rates to be accommodated with a minimal pressure drop (Δp). The operation of the directional valves may be electrical, pneumatic, dynamic, mechanical or lever.
    The center position is obtained by means of calibrated length springs which reposition the spool in the center or end of travel position once the action of the impulse is over.
  • The solenoids are constructed with a protection class of IP66 to DIN 40050 standards and are available in either AC or DC form in different voltage and frequencies.
  • The new type DC coil “D15”, of cause their high performance, allows to increasing the limits of use respect to last series.
  • All types of electrical control are available, on request, with different types of manual emergency controls.
  • The solenoid coils are normally arranged for DIN 43650 ISO 4400 type connectors; is available on request these variant coils: with AMP
  • Junior connections, with AMP junior and integrated diode, with Deutsch DT04-2P connections or solenoid with flying leads. Connectors with built in rectifiers or pilot lights are also available.
  • The valves are designed for use with DIN 51524 standard hydraulic mineral oils and it is recommended that filters should be fitted to ensure a maximum contamination level of class 10 in accordance with NAS 1638, β25≥75.
  • Double Solenoid Valve 12V DC

SHIPPING & DELIVERY

All orders are shipped within 24 to 48 hours of you placing the order using TCS eCommerce, USPS or ePacket depending on your location and fastest available service. Typical delivery time frame is between 07 to 08 business days however, you may receive your items much earlier. All orders are shipped with tracking number so you can track it every step of the way! Packages may be faced with delays beyond our control such as customs or postal delays.

Reviews

There are no reviews yet.

Be the first to review “BREVINI HYDROLIC KIT”

Your email address will not be published. Required fields are marked *